Murco MGS Especificaciones Pagina 30

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 31
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 29
MGS Installation and Operation Manual
30 1000-0085 Rev 0
Section 7. Troubleshooting
Symptom Possible Cause(s)
Green and Red light
off
• Check power supply. Check wiring.
• MGS was possibly damaged in transit. Check
by installing another MGS to confirm the fault.
Red light on, green led
off (indicates a fault)
• Sensor may be disconnected from printed
circuit board. Check to see sensor is properly
inserted into board.
• The sensor has been damaged or has
reached the end of life and needs to be
exchanged. Contact Murco for instructions
and support.
Alarms in the absence
of a leak
• Try setting an alarm delay.
• Perform a bump test to ensure proper
operation.
Tel:
+44
(0)191 490 1547
Fax:
+44 (0)191 477 5371
Email:
northernsales@thorneandderrick.co.uk
Website: www.heattracing.co.uk
www.thorneanderrick.co.uk
Vista de pagina 29
1 2 ... 25 26 27 28 29 30 31

Comentarios a estos manuales

Sin comentarios